诺氟沙星片在中国健康受试者空腹和餐后状态下生物等效性研究#br#

目的：采用随机、开放、两周期、自身交叉、单次给药试验设计比较浙江医药股份有限公司新昌制药厂生产的诺氟沙星片与原研产品BACCIDAL在中国健康人体中的生物利用度，并评价两种制剂的生物等效性。方法：分别在空腹和餐后条件下，健康受试者随机交叉单剂量口服诺氟沙星片受试制剂或参比制剂100 mg，采用液相色谱-质谱串联（LC-MS/MS）法测定受试者服药前后不同时间点血浆内药物浓度，采用WinNonlin 7.0软件计算主要药代动力学参数，并评价两种制剂的生物等效性。结果：空腹试验共有28例受试者入组并完成试验，诺氟沙星受试制剂与参比制剂的Cmax分别为（607.62±125.24）ng/mL和（552.01±134.11）ng/mL；AUC0-t分别为（2 551.66±509.08）ng·mL-1·h和（2 429.98±460.47）ng·mL-1·h；AUC0-∞分别为（2 675.40±523.04）ng·mL-1·h和（2 557.68±485.43）ng·mL-1·h；t1/2分别为（6.07±0.69）h和（6.18±0.92）h；两种制剂的Cmax、AUC0-t和AUC0-∞几何均值比的90%置信区间分别为101.45%～121.94%、98.96%～111.27%、98.82%～110.76%。餐后试验共有28例受试者入组并完成试验，诺氟沙星受试制剂与参比制剂的Cmax分别为：（256.54±58.87）ng/mL和（300.80±94.67）ng/mL；AUC0-t分别为（1 314.74±349.92）ng·mL-1·h和（1 278.60±314.77）ng·mL-1·h；AUC0-∞分别为（1 413.73±361.98）ng·mL-1·h和（1 374.98±321.62）ng·mL-1·h；t1/2分别为（6.66±1.23）h和（6.66±1.34）h；两种制剂的Cmax、AUC0-t和AUC0-∞几何均值比的90%置信区间分别为81.42%～93.56%、99.61%～105.58%、99.80%～105.21%。结论：浙江医药股份有限公司新昌制药厂生产的诺氟沙星片与原研产品BACCIDAL在中国健康受试者空腹和餐后服用的状态下等效且安全性良好，临床上可以替换使用。     

Fabrication of novel silicon carbide-based nanomaterials with unique hydrophobicity and microwave absorption property

Novel SiC-based nanomaterials, namely the nitrogen and aluminum co-doped SiC@SiO₂ core-shell nanowires and nitrogen-doped SiO₂/Al₂O₃ nanoparticles, have been fabricated through a facile thermal treatment process based on the chemical vapor deposition and vapor-liquid reaction. These nanomaterials show remarkable hydrophobicity with a water contact angle (CA) over 140°, which are aroused by the surface zigzag morphology of the nanostructures and the hydrocarbyl groups generated during the preparation process. Moreover the nanocomposites also exhibit relatively prominent microwave absorption (MA) properties in the frequency range of 2.0-18.0 GHz. The minimum reflection loss (RL) value as low as −23.68 dB can be observed at 14.16 GHz when the absorber thickness is 2.6 mm with a loading rate of 16.7 wt%. And the nanocomposites-based absorbent can achieve an effective absorption bandwidth (RL < −10 dB) of 4.48 GHz with the absorbent thickness of 2.5 mm. This enhanced microwave attenuation performance can be attributed to multiple polarizations and perfect impedance matching conditions, as well as multiple internal reflections. These marvelous properties make these N and Al co-doped SiC@SiO₂ core-shell nanowires and N-doped SiO₂/Al₂O₃ nanoparticles display extensive application potential as MA materials in harsh environment.     

采编播系统的异地构建和应用

主要阐述在距离台技术大楼2 km远的海盐一家门频道采、编、播系统的构建。整个系统的搭建,充分考虑了时间、空间、距离等各方面的要求,突出异地构建的特点,融合了电视台的节目录制、安全播出、计算机网络、远程控制等多方面技术。     

Effect of an abrupt change in pulling rate on microstructures of directionally solidified Al2O3-Er3Al5O12 eutectic and off-eutectic composite ceramics

Directionally solidified microstructures of Al₂O₃-Er₃Al₅O₁₂ eutectic and off-eutectic in situ composite ceramics were explored under abrupt-change pulling rate conditions. Corresponding temperature distributions and interface locations were studied. In eutectic composition, fluctuation of eutectic spacing occurred when the pulling rate increased abruptly. A gradually increase or abrupt increase in eutectic spacing was observed when the pulling rate decreased abruptly. In hypoeutectic and hypereutectic compositions, formation of the primary phases were suppressed when the pulling rate increased abruptly from 10?µm/s to 100?µm/s, while primary phases precipitated when the pulling rate decreased abruptly from 100?µm/s to 10?µm/s. The interface altitude decreased after the pulling rate increased abruptly, but increased after the pulling rate decreased abruptly. The liquid composition restriction (around the eutectic composition) at the eutectic interface plays an important role in the suppression of the primary dendrite and coupled eutectic oxides can be obtained in off-eutectic compositions even under higher solidification rate conditions.     

A method for rapidly evaluating reliability and predicting remaining useful life using two-dimensional convolutional neural network with signal conversion

Journal of Mechanical Science and Technology - Real-time monitoring and rapid evaluation of bearing operating conditions, especially for the reliability evaluation and remaining useful life (RUL)...     

焊缝表面缺陷激光扫描三维重构测量

为检测工件焊缝表面缺陷，采用点激光位移传感测距法和数据拟合技术进行焊缝表面缺陷检测试验研究. 首先采集缺陷表面轮廓数据点，利用高斯滤波对原始数据降噪处理. 再对处理后的数据点进行Delaunay三角剖分，使散乱点连接并结合其空间坐标重构出缺陷的三维模型. 结果表明，基于点激光位移传感测距技术及焊缝表面缺陷三维重构方法可以准确判断焊缝成形情况.     

Preparation of biaxially textured Ce1-x(Y0.2Zr0.8)xOδ buffer layers on RABiTS NiW tapes by chemical solution deposition

Highly (100)-oriented Ce_1-x(Y_0.2Zr_0.8)_xO_δ (CYZO) films were prepared on biaxially textured NiW substrates by a chemical solution deposition approach using metal inorganic salts as starting materials. It has been found that both the preferential orientation and surface roughness of CYZO films decrease gradually with increasing of the doping percentage of Y³⁺ and Zr⁴⁺ ions. The epitaxial growth relationship of (220)_CYZO//(200)_NiW and [00?l]_CYZO//[001]_NiW was demonstrated by XRD texture measurement as well as atomic resolution STEM observation. XRD, Raman and XPS spectra results indicate that Y³⁺ and Zr⁴⁺ ions were indeed introduced into CeO₂ lattice to substitute Ce⁴⁺ ions and form cubic fluorite CYZO solid solution. Moreover, CeO₂ buffer layer can be endowed a strong enough capability to prevent element diffusion through co-doping of yttrium and zirconium, provided that an optimal doping ratio of them is adopted. This will provide a new approach to fabricating strong-barrier single buffer layer for coated conductor.